Bacterial testing improves biosecurity at marine hatchery

Charles W. Laidley, Ph.D. Kimberly Pinkerton, M.S. Chatham K. Callan, Ph.D.

Control of pathogen entry and proliferation an essential aspect of animal production

Bacterial
Changes to reduce bacteria levels in the research hatchery included improved system design, better management and the optimization of pipe sizes and reduction of by-passes and other regions where bacteria might accumulate.

With the emergence of marine finfish aquaculture in the United States, there is a growing need to improve the biosecurity of marine hatchery operations, whether targeting fingerling production for onshore or open ocean grow-out. The control of pathogen entry and proliferation is an essential aspect of intensive animal production that is rapidly becoming one of the more difficult challenges facing the finfish culture industry worldwide.

The aquatic nature of aquaculture operations and frequent import of broodstock, eggs and live feeds create many opportunities for pathogen entry into hatchery operations. Once imported, pathogens can rapidly proliferate, particularly in the warmwater hatchery operations of the state of Hawaii and throughout the Pacific.

Moi fingerling production

After the success of its open ocean cage demonstration project, Oceanic Institute began culturing moi fingerlings for a commercial cage start-up in collaboration with Grove Farms Moi & Poi, under funding from National Oceanic and Atmospheric Administration Marine Aquaculture Program.

To make this venture economically viable, fingerling production was scaled up from less than 100,000 to over 250,000 fingerlings per run, and operations expanded to a monthly basis. Note that moi spawn on a monthly lunar cycle and require only 25 days in the hatchery, effectively allowing up to 12 production cycles/year.

Pathogen pathways

Bacterial
Bacterial screening of samples from various parts of the larval-rearing system led to improvements in operational protocols and system design.

Soon after reaching target output, the operation began encountering larval mortality issues that led to run terminations soon after larvae began feeding on rotifers. Preliminary diagnostics implicating the presence of pathogenic bacteria during feeding initiation and gut colonization led the authors to begin examining the vectors for pathogen entry, movement and proliferation within the marine warmwater hatchery environment.

Initial screens revealed a wide variety of bacteria – some of which were pathogenic – entering the hatchery operations through eggs, water and live feeds. Vertical pathogen transfer through eggs can be highly problematic in that egg introductions from broodstock holding systems to the hatchery are clearly necessary to stock tanks.

Earlier work at Oceanic Institute revealed a number of highly pathogenic bacterial strains associated with moi eggs. This work also showed that a rigorous “rinsing” procedure with sterilized seawater proved as effective as the use of specific egg disinfectants. Subsequent studies indicated that iodine and hydrogen disinfectants tended to be ineffective at lower concentrations, and at higher concentrations are detrimental to the small eggs of many pelagic spawning species.

Waterborne bacteria

Although the incoming water for hatchery operations tended to have relatively low levels of marine cultivable bacteria relative to other examined vectors (Fig. 1), data suggested the waterborne bacterial complement had significant impacts on hatchery operations. Initial screens showed that bacteria titers in the water supply had remarkable fluctuations from less than 100 to over 6,000 cfu/ml, despite using water from a rather constant saltwater well system.

marine agar
Fig. 1: Total marine agar cultivable bacteria levels found in various elements of the larval-rearing system.

Hatchery run “crashes” were associated with periods of higher levels of cultivable bacteria. Examination of the incoming water source revealed that despite their critical role in protecting the hatchery, the water treatment and delivery systems provided many sites for bacterial proliferation and often added to the bacterial loads that reached the larval-rearing systems. Problem sites included pressurized sand filters and cartridge filters, along with piping, valves and equipment by-passes. Further, sand filter chlorination appeared to make the issues worse.

Design changes

Therefore, both the flow-through and recirculating water treatment systems used in the hatchery operations were redesigned. The design changes included a switch from sand to crushed glass as the initial solids filter to facilitate media cleaning, additional cartridge filtration, optimization of pipe sizes to facilitate self-scouring, and reduction of loops, by-passes, valves and other regions where bacteria might accumulate.

Water-sampling ports were incorporated after each treatment process to facilitate system study. In addition, the systems were designed so that cleaning and sterilizing solutions could be easily circulated through all parts of the systems for routine cleaning between hatchery runs.

The authors found increased bacteria levels at system startup and following system sterilization, while many system components initially increased total system bacteria levels. Over a week to 10 days of operation, the bacterial levels stabilized, leading to an overall reduction in cultivable bacteria of over 200-fold from initial conditions (Fig. 2).

bacteria
Fig. 2: Changes in cultivable bacteria levels through each step of water treatment. Initial hatchery design included sand filtration, 50- and 5-µ/m cartridge filtration and ultraviolet sterilization. The improved hatchery design included vacuum degassing, glass filtration, 5- and 1-µ/m cartridge filtration and U.V. sterilization.

Perspectives

Although many findings appeared common-sense, there is little information available on microbial ecology in aquatic hatchery operations. The adoption of relatively simple microbial culture screening protocols led to a better understanding of what goes on at the microbial level during hatchery operations and subsequent changes in operational protocols and system designs. In addition, the adoption of recirculating technologies for hatchery operations appears to provide a more stable microbial background less prone to the rapid system fluxes seen under flow-through modes of operation.

Another approach to reduce pathogenic species is the introduction of probiotic bacterial strains into the larval-rearing system to facilitate system population by beneficial bacteria. Clearly, a better understanding of the hidden microbial world of hatchery ecosystems would be a welcome addition for hatchery managers. In this case, a combination of operational and system changes helped reduce the risks of pathogen entry to the larval-rearing systems and helped restore large-scale fingerling production.

(Editor’s Note: This article was originally published in the January/February 2010 print edition of the Global Aquaculture Advocate.)

Now that you've reached the end of the article ...

… please consider supporting GSA’s mission to advance responsible seafood practices through education, advocacy and third-party assurances. The Advocate aims to document the evolution of responsible seafood practices and share the expansive knowledge of our vast network of contributors.

By becoming a Global Seafood Alliance member, you’re ensuring that all of the pre-competitive work we do through member benefits, resources and events can continue. Individual membership costs just $50 a year.

Not a GSA member? Join us.

Support GSA and Become a Member