Product improves nitrification in RAS

David D. Kuhn, Ph.D. David J. Drahos

Novozymes Biologicals’ bacteria product is rich in both types of nitrifiers needed to convert ammonia into nitrate

nitrification
Microscopic and fluorescence views of the nitrifier product show the activity of the nitrifiers.

Nitrogenous wastes can accumulate in closed aquaculture ponds and recirculating systems, primarily in the forms of ammonia from animal excretion and decomposing organic solids such as uneaten feed.

Ammonia can be removed from the systems and used directly as a nutrient by heterotrophic bacteria, algae or plants. Ammonia can also be removed from the system via nitrification, which is a two-step process performed by autotrophic bacteria called nitrifiers.

More specifically, oxidation of ammonia to nitrite is typically performed by bacteria from the genus Nitrosomonas. Nitrite is then oxidized to nitrate by bacteria from the genus Nitrobacter. The nitrification process often takes place naturally in ponds and recirculating system biofilters.

It is important to ensure nitrification is efficient in the conversion of ammonia and nitrite to nitrate because nitrate is the least toxic form. Ammonia and nitrite are toxic to aquatic animals at concentrations as low as 1 mg/L. Meanwhile, nitrate doesn’t become toxic to aquatic animals until concentrations are greater than 60 mg/L. Some aquatic animals are more sensitive, while others exhibit greater tolerance to these nitrogenous wastes.

Effective nitrification

Factors that influence nitrification efficiencies include the amount of nitrogenous waste, nitrifier population and types, biofilm thickness, alkalinity, oxygen levels and temperature. If healthy populations of both ammonia- and nitrite-oxidizing bacteria are not present, then no nitrification will occur.

This is the case for a new biofilter that has no bacteria. It typically takes four to eight weeks to initiate a new biofilter using earlier techniques, which prescribe no additions other than ammonia. Furthermore, sometimes a biofilter that is established can fail and needs to be restarted. In both cases, a bacterial product that is rich in both ammonia- and nitrite-oxidizing bacteria could provide the means to mitigate ammonia and nitrite.

Nitrifier product

Novozymes Biologicals, Inc., a biotech company based in Salem, Virginia, USA, has developed a nitrifying bacteria product that is rich in both types of nitrifiers needed to convert ammonia into nitrate. This liquid product, PondProtect-L, is primarily a combination of Nitrosomonas eutropha ammonia-oxidizing bacteria and Nitrobacter winogradskyi nitrite-oxidizing bacteria, both of which are great candidates for typical aquaculture waters.

Novozymes teamed with Virginia Tech to conduct research on the effectiveness of this product in a controlled bench-scale study and on a production scale at a shrimp farm in Virginia. In both cases, recirculating aquaculture systems (RAS) were tested with white shrimp, Litopenaeus vannamei, at salinities ranging approximately 10-15 g/L.

Bench study

The bench-scale study was conducted in six 150-L recirculating systems with a new biofilter. Three systems were inoculated with the bacteria product and three systems did not receive any bacteria. Thirty juvenile shrimp were stocked in each system and fed the same type and amounts of food. Nitrification rates in the inoculated systems had significantly lower levels of both ammonia and nitrite (Fig. 1).

Nitrite
Fig. 1: Nitrite concentrations in control tanks containing juvenile shrimp.

Quantitative polymerase chain reaction testing was used to verify the presence of the desirable Nitrobacter winogradskyi nitrifying bacteria strain in the inoculated systems.

Production-scale application

During the first year of operation, a commercial-scale RAS shrimp farm observed occasional spikes of ammonia and long-sustained spikes of nitrite, which significantly impaired the health of shrimp in the production-scale raceways.

To mitigate these pollutants from compromising shrimp production, the nitrifying bacteria product was applied to the systems. Shortly after application, nitrite levels began to decrease significantly and continued to drop to levels considered safe for shrimp culture (Fig. 2).

Nitrite
Fig. 2: Nitrite concentrations in an RAS shrimp production raceway after addition of a nitrifier product.

Perspectives

Many aquaculture operations rely on nitrification for the removal of toxic nitrogenous constituents such as ammonia and nitrite from the culture water. This process relies on a healthy population of nitrifying bacteria.

The use of a commercial nitrifying product can inoculate a new biofilter or a failing biofilter with viable populations of both ammonia- and nitrite-oxidizing strains of bacteria. Even though the nitrifying bacteria product tested was initially designed for pond applications, it performed well in recirculating systems.

(Editor’s Note: This article was originally published in the July/August 2011 print edition of the Global Aquaculture Advocate.)